- Home
- .100 Gap Barrel Bushing Carry Bevel Govt .705 OD Unbored SS
.100 Gap Barrel Bushing Carry Bevel Govt .705 OD Unbored SS
-
Overview
This product fits:
Out of Spec Government 1911s (with your provided measurements)
Out of Spec Commander 1911s (with your provided measurements and the commanderize option selected)
This is typically a drop in part when measurements are provided. Minor fitting may still be required depending on the precision of the measurements provided and the machining of the slide and barrel. Please do not add any tolerances to the measurements you provide. Our machinist will add the appropriate tolerances.
Please note. If any customizable option is selected, there is an approximate 3 week lead time.
Check out our bushing FAQ page! -
Specifications
Machined From: Stainless Steel
Finish: N/A
Flange Thickness: .125"
Inner Diameter of Your Slide: .705" - this number corresponds to the outer diameter of the bushing
Outer Diameter of Your Barrel: .568" or custom bore if selected - this corresponds to the inner diameter of the bushing, we build in the tolerance
Bore Type: Straight
Recommended Spring Plug: Long Nose (must be purchased separately) -
Product Details
We desiged the .100" gap bushing to service those that have a gap between their slide and the bushing. On a normal slide a lug gap of .117" is considered standard. Some slides have a gap of only .105:, so a normal bushing left a gap of .012" between the bushing and the slide. To correct this problem, we have moved the lug closer to the flange tightening the gap.
Our Carry Bevel bushing is machined from solid barstock steel.
The flange thickness is .125" which protects the barrel more because it sticks out farther than the spec bushing.
Available in Stainless Steel and blued Carbon Steel.
Gunsmith Fit is available in all O.D.'s with a .568" I.D. Straight Bore.
O.D. of the bushing = Inside diameter of your slide - usually .699" - .705";
I.D. of the bushing = Outside diameter of your barrel - usually .575" - .583".
Please measure these two areas with calipers to find the sizes you need.
Please select your options carefully.
Please provide exact measurements, as our machinist will allow for clearance.
Check out our FAQ Section for instructions on how to accurately take these measurements.
Angle Bore is bored on an angle or a snug fit (measurements must be precise);
Straight Bore is bored straight without variation.
Please allow 3 weeks for custom bored bushings.
When choosing a spring plug, choose the EGW Long Nose Spring Plug for a flush fit!Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov. -
More Information
More Information GTIN 841370103805 Slide Components Bushings -
Reviews
-
Product Questions