Machined From: Carbon Steel
We have found that suppliers of pin sets to the firearms industry are using leaded steel. You can easily cut leaded steel pins with wire cutters. Our pin sets are made from drill rod, which is a much stronger material. Our pins are manufactured to the GI 1911 print specifications with tighter tolerances.
Pin Set Includes:
Hammer Strut Pin
Ejector Pin - Does not work on 2011 and double stack 1911s
Plunger Tube Pin (Safety Side)
Plunger Tube Pin (Slide Stop Side)
Mainspring Cap Retainer Pin
Mainspring Housing Pin - Does not work on 2011 and double stack 1911s
Mainspring Housing Retainer Pin
Available in blued carbon steel or stainless steel.
EGW Pin Sets are great addition to your emergency reserve. When cleaning your firearm, you never know when a pin will go missing!
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
More Information GI Components Pins Frame Components Pins and Pin Sets
Write Your Own Review
THE BEST YOU CAN PROCURE ANYWHERE !!!!!!IN 2018, I DID A DETAIL STRIP, CLEAN, & LUBE ON A FELLOW "JARHEAD'S" .45 ACP 1911 G-M. MY INTENT WAS TO ONLY REPLACE THE OEM SPRINGS WITH A SET OF "ISMI" SILICON-CARBIDE SPRINGS, BUT NOTICED UPON DISASSEMBLY, THAT QUITE A FEW OF THE FRAME PINS PUSHED OUT WITH VIRTUALLY NO EFFORT.....BUMMER !!!! THE HAMMER & SEAR PINS WERE LOOSES ENOUGH TO PERMIT A SLIGHT "COCKING" OF THEIR RESPECTIVE PARTS & THUS WAS RESULTING IN VARIANCES IN TRIGGER PRESS WEIGHT & THE "RELEASE" WHEN THE SEAR NOSE & FRONT OF HAMMER HOOKS DISENGAGED !!!!!! SO OUT WITH THE OLD PINS & IN WITH THE NEW ONES---WOW !!!! NOT TOO TIGHT & NOT TOO LOOSE, BUT JUST RIGHT. ALL I DID WAS LUBE & INSTALL AS NOT ONE REQUIRED ANY "SPIN POLISHING" WITH A DRILL BEFORE INSTALLATION---"ATTA-BOY" EVO-GUN-WORKS.....RAH !!!!