Save 10% over $49.99 Promo code: THANKFUL  | 20% over $149.99 Promo code: THANKFUL2 Valid 11/27 - 11/30  |  Our offices are closed 11/26 - 11/29
  • Login/Register
  • My Cart  Item(s)
menu
  • Specifications

    Material: 7075 Aluminum
    Coating: Matte Black Hardcoat
    Overall Length: 1.604"
    Overall Width: .99"
    Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw
    Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)

    Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

  • Product Details

    Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

    Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

    Installation Instructions
    - Remove the rear sight*
    - Install the EGW Sight Mount in the dovetail
    - Tighten set screw (if applicable)
    - Place the red dot sight on the EGW Sight Mount
    (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
    - Apply blue Loctite to the provided mounting screws
    - Torque mounting screws to 15in/lbs

    Modification of your firearm may nullify the manufacturer's warranty.
    This product should be installed and checked by a qualified gunsmith.
    No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

    Click here to see a video from Vortex on how to install our red dot base on a slide.


    Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
  • More Information
    More Information
    GTIN 841370107162
    Red Dot Brand Holosun 407K / 507K (MOUNT MUST BE MODIFIED), JP Enterprises JPoint, Leupold DeltaPoint, Shield RMS / RMSc / SMS, Sig Romeo Zero
    Firearm Brand Kimber
    Scope Mount Color Black Hardcoat Anodized Type III
    Model Kimber Fixed Rear Sight
  • Reviews
    Write Your Own Review
    You're reviewing:DeltaPoint Pro (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) for Kimber 1911 Fixed