Machined From:Solid 7075 T6 Aircraft Grade AluminumFinish:Matte Black OnlyCompatible with Picatinny or Weaver scope rings.Mounting Hardware:
#6-48 X 1/4 Screws and T-10 Bit IncludedTorque Specs:
20 in/lbsCenter Spread:2.825"
Overall Length of Mount:5.970"
Standard vs. HD rails
To our knowledge, Browning has started producing their 22-250 and .204 Ruger receivers in the Super Short Action spacing, before purchasing please measure your inside hole spacing to confirm!
This mount is made specifically for the Browning X-Bolt WSSM. Please check your center spread and select the correct mount. There have been issues with some guns being chambered for a certain action length and having a different length action. EX: 22-250 in a WSSM action. Please make sure the scope mount you are selecting has the correct center spread!
Browning calls their WSSM guns SSA. If you have an SSA this is the mount you will need.
0 MOA -if shooting 0-500 yards
20 MOA -if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
These bases sit at approximately0.540?/span> high.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
Compatible with Picatinny or Weaver scope rings. Add EGW? HD Scope Rings to make it a complete package!
From manufacturing to packaging, EGW? products are made with pride in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc.
For more information, go to www.P65Warnings.ca.gov.