Machined From:Solid 7075 T6 Aircraft Grade AluminumFinish:Hardcoat Anodized Matte Black OnlyCompatible with Picatinny or Weaver scope rings.Mounting Hardware:#6-32 X 3/4Screws and T-15 Bit IncludedOverall Length of Mount:5.575"
Front .540" Rear .567"
Torque Specs:25 in/lbs
Dovetail: 11mm(measures .437" across top of dovetail)
Standard vs. HD rails
This mount will fit:
CZ 457 (it is about 1" shorter than the full receiver)
Sako Finnfire M94 S
This base is Right-Handed only.
It is available in 3/8" and 11mm dovetails.Determine which dovetail you have by measuring across the top of the dovetail. If you measure 0.437" you have an 11mm dovetail. If you measure 0.5" you have a 3/8" dovetail.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
Compatible with Picatinny or Weaver scope rings. Add EGW? HD Scope Rings to make it a complete package!
From manufacturing to packaging, EGW? products are made with pride in the USA.
Installation: EGW recommends 25 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.