Mount Top Machined From:Solid 7075 T6 Aircraft Grade Aluminum
Mount Top Finish:Hardcoat Matte Black
Mount Bottom Machined From:4140 SteelMount Bottom Finish: BluedCompatible with Picatinny or Weaver scope rings.
Mounting Hardware:8-32 Socket Head Hex Screws and Wrench ProvidedTorque Specs:
20 in/lbsOverall Length of Mount:5.094"
Our Mosin Nagant mount allows you to remove the rear leaf sight and install our base without the need to unsolder anything. It is one of the most stable bases on the market and uses the rear sight housing so there are no major modifications to your rifle like with some other brands.
Remove rear leaf sight from the housing
Keep the original pin as you will need this to install our base
Insert the tabbed side of our steel base in to the rear of the rear sight
Check for fitment on the front of the steel base
The corners and front may need to be filed down to achieve the optimal fit
Once the base sits completely in the rear housing insert the retaining pin from the original sight
Adjust the set screw to take up any play in the rail
Screw the top aluminum mount to the steel base
This mount can be put on in either direction
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel base is blued.
Compatible with Picatinny or Weaver scope rings. Add EGW? HD Scope Rings to make it a complete package!
From manufacturing to packaging, EGW? products are made with pride in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc.
For more information, go to www.P65Warnings.ca.gov.