We have been experiencing slight delays with our carriers. We apologize for the inconvenience.  |  We are not able to ship internationally.
  • Specifications

    Rail Type: One Piece Picatinny
    Machined From:
    Solid 7075 T6 Aircraft Grade Aluminum
    Finish: Matte Black Hardcoat
    Center Spread: 3.93"
    Overall Length of Mount: 6.025"
    Height: .35" (Top of Receiver to Top of Picatinny)
    Weight: 2 oz
    Quick Disconnect Ring Compatible: Yes
    Ambidextrous: Yes
    Compatible with Picatinny or Weaver scope rings.
    Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
    Torque Specs: 20 in/lbs

     

  • Product Details

    Introducing the newest addition to the EGW lineup; our Hunter series picatinny scope mount. We saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what we came up with. After countless hours of prototyping and testing, the Hunter mount was born.

    Featuring:

    7075 T6 aluminum for an extremely durable yet lightweight construction.

    Type III hardcoat anodizing protects the mount from whatever nature can throw at it.

    Chamfered edges provide a snag free hunt.

    A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts.

    This mount comes standard with a bevel on both sides making it ambidextrous.

    Due to the change in which receivers have #6 and #8 screws from Savage, we recommend you remove and measure one of the screws prior to purchasing our scope mount. This will ensure that you receive the correct screws necessary for your specific application. Some Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We now have mounts drilled for #8 screws available for all MOAs. We also have a #8 Drill Out Kit available for customers who would like to drill the mounts out themselves. If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Savage Customer Support at (413) 568-7001 or (800) 370-0708 and supply them with your serial number.

    This mount is drilled for and provided with 6-48 Hex Head screws.  We recommend reviewing our listing below for predrilled #8 mounts if you require #8 screws. Our 8-40 and 6-48 screws utilize the same head design, which allows us to use the same countersink in all of our mounts. If you purchased a mount with the incorrect screws, you can purchase our #8 Drill Out Kit.

    We do offer Savage rails that are pre-drilled for #8 screws. They are available here:
    HD Savage Round Back Short Action 0 MOA Drilled for #8-40 Screws
    HD Savage Round Back Short Action 20 MOA Drilled for #8-40 Screws
    HD Savage Round Back Short Action 30 MOA Drilled for #8-40 Screws
    HD Savage Round Back Short Action 40 MOA Drilled for #8-40 Screws

    Rifles requiring #8 screws (please check your individual rifle to be sure):
    10/110 BA Stealth
    10/110 Stealth Evolution
    110 Scout
    110 Wolverine
    10 GRS
    110 Tactical
    110 Tactical LH
    110 Tactical Desert
    110 Ridge Warrior
    110 Ultralite
    Christensen Arms Ridgeline (Please Check Your Serial Number Here)

    Screw Diameters
    #6 Screws - .13" diameter
    #8 Screws - .16" diameter

    We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

    We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

    Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

    The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

     

    Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

     

     

  • More Information
    More Information
    Model Round Back (Receiver) Short Action Model 10, 11, 12, 14, 16 (Some Newer Model 110s)
    Firearm Brand Savage
    Minute Of Angle (MOA) 0 MOA
    Scope Mount Color Black Hardcoat Anodized Type III
  • Reviews
    Write Your Own Review
    You're reviewing:Hunter Series Savage Round Back Short Action Picatinny Rail 0 MOA