FREE U.S. SHIPPING on orders over $80
  • Product Details
    Machined From: 6061 T6 Aluminum
    Finish: Matte Black Only
    Mounting Hardware:#6-48 X 1/4T-10 Screws and T-10 Bit Included
    Torque Specs:20 in/lbs

    Center Spread:4.485"
    Overall Length:8.625"
    Height:.395"



    Standard vs. HD rails



    This base also fits theBergara B-14rifles (#6 screws), Christensen arms long actions andSauer 100 and 101.

    TheBergara Premierrequires the base to be drilled out for #8 screws

    This mount comes standard with a bevel on both sides making it ambidextrous.

    The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles. Our F-Class mounts are extended out the front to accommodate prone shooting allowing the scope to be set further forward and to support exceptionally long scopes. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) render it useless on these two guns.
    This mount is machined from solid 6061 aluminum.

    The middle spread is the distance between the two middle holes, center to center, on your receiver.

    This mount is available in 0, 15 and 20 MOA. Please see our FAQ section for more information on action lengths and MOA.

    Werecommend:
    0 MOA -if shooting 0-500 yards
    20 MOA -if shooting 500-1000 yards

    When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.EGW? one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

    Add EGW? Practical or HD Scope Rings to make it a complete overhaul!

    This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

    Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).



    Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
  • Reviews
    Write Your Own Review
    You're reviewing:Remington 700, 721, 725 Dual Extension Long Action Picatinny Rail 0 MOA