Machined From:4140 Carbon SteelFinish:ParkerizedCompatible with Picatinny or Weaver scope rings.Mounting Hardware:
Socket Head Torx?15 Screws and Wrench ProvidedTorque Specs:
20 in/lbsCenter Spread:3.768"
Overall Length of Mount:7.458"
These mounts are a customer overrun and have an integrated recoil lug.
These bases sit at approximately 0.39?high and are not recommended for use with quick disconnect rings, due to the valley down the center.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are sand blasted. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
This mount is only available in20 MOA -for shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
Compatible with Picatinny or Weaver scope rings. Add EGW? HD Scope Rings to make it a complete package!
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc.
For more information, go to www.P65Warnings.ca.gov.