FREE U.S. SHIPPING on orders over $80
  • Product Details
    Machined from: Domestic 6061 T6 Extruded Aluminum
    Finish: Matte Black
    Mounting Hardware:#6-48 X 1/4 Screws and T-10 Bit Included
    Center Spread:3.245"
    Overall Length:7.458"



    Standard vs. HD rails

    Our Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite and T3 X Rifles. The T3X rifle has an extra hole in the receiver that our rail covers up and does not use.

    Compatible with:
    T3x Superlite Camo
    T3x Superlite
    T3x Compact
    T3x Lite
    T3x Lite Stainless
    T3x Compact Tactical Rifle
    T3x Varmint
    T3x Laminated Stainless
    T3x Forest
    T3x Hunnter Stainless
    T3x Hunter
    T3 Hunter
    T3 Laminated Stainless
    T3 Varmint
    T3 Super Varmint
    T3 Varmint Stainles
    T3 Compact Tactical

    Modification to the front of the mount is required to fit the Tikka T3X Tac A1. The mount must be cut down to fit behind the forend. Our mount is not the same height as the forend.

    Our mount does not have a recoil lug.

    This mount is available with a 0 or 20 MOA.

    Werecommend:
    0 MOA -if shooting 0-500 yards
    20 MOA -if shooting 500-1000 yards

    When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.


    Our Tikka T3 mount is provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled at tapped for 6-48 screws. Your gun may require metric screws. If you require metric screws, please select that option. We are happy to provide whichever size screws you need.

    Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW? one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
    This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

    Add EGW? Practical or HD Scope Rings to make it a complete overhaul!

    We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

    The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

    Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).


    Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
  • Reviews
    Write Your Own Review
    You're reviewing:Tikka T3 Picatinny Rail Scope Mount 0 MOA Ambidextrous