Material:7075 AluminumCoating:Matte Black HardcoatOverall Length:1.780"Overall Width:1.1"Mounting Hardware:(2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set ScrewRed Dot Fitment:Trijicon RMR, Holosun HS507C
This mount fits:
Kimber models with fixed rear sights (adjustable models have windage AND elevation)Desert Eagle 1911G*
Desert Eagle 1911C*
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.*Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight.No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
2 Flat Head Cap Screws - Provided for Trijicon RMR
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Click here to see a video from Vortex on how to install our red dot base on a slide.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc.
For more information, go to www.P65Warnings.ca.gov.