Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.
Coating:Matte Black Hardcoat
Mounting Hardware:(2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (2) 6-48 Hex Head Screws
Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*
*All ADE mounts require 6-32 x 3/8" screws.
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Click here to see a video from Vortex on how to install our red dot base on a slide.
This mount has a bottom radius of .670". There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns:
Mossberg 500, 590, 835, 930, 935 Pre '97
Mossberg 500, 590, 835, 930, 935 Late (after '97) (Requires 8-40 and Longer Screws)
Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws)
Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws)
Browning A-Bolt 12 Gauge
Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws)
Remington 700, 722, 40x
Remington xp 100
Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws)
Savage Arms Centerfire Models
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Write Your Own Review