Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.831"
Overall Width: 1.062"
Mounting Hardware: (2) 8-32 Button Head Screws, (1) 6-32 Torx Head Screw
Red Dot Fitment: Vortex Razor, C-More STS, STS2 & RTS2
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15in/lbs
The screws that are included with this mount require a 5/64'' allen wrench for installation.
Click here to see a video from Vortex on how to install our red dot base on a slide.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
More Information Firearm Brand Colt Scope Mount Color Black Hardcoat Anodized Type III Model Anaconda, Python, Gold Cup (Elliason Style Rear Sight)
Write Your Own Review
Mount 49441 for Colt Gold CupI purchased this mount for my Colt Gold Cup Trophy and could not mount the Vortex Razor Red Dot site to this mount because the pins were to tall & to thick to fit into the holes of the adapter plate supplied with the Razor site. I had to file down the pins & "lapped" the adapter plate onto the pins after to fit it flush together. But mount fitted perfectly to the pistol slide without any further changes.