- Home
- Vortex Viper / Venom Red Dot Sight Mount for Savage / Stevens 301 12 and 20 Gauge Models (fits Burris FastFire and Docter)
Vortex Viper / Venom Red Dot Sight Mount for Savage / Stevens 301 12 and 20 Gauge Models (fits Burris FastFire and Docter)
-
Overview
MountingĀ hardwareĀ isĀ included.
This mount fits:
Factory Drilled and Tapped Stevens 301 12 and 20 gauge models only.
This mount measures .350" from the top of the barrel to the top of the mount.
This mount does not fit:
Stevens 301 .410 models -
Specifications
Material:Ā 7075 Aluminum
Coating:Ā Matte Black Hardcoat
Overall Length:Ā 1.811"
Overall Width:Ā .99"
Thickness Above Receiver: .350"
Torque Specs: 15 in/lbsMounting Hardware:
(2) 6-32 Button Head Screws - Requires 5/64 Wrench or Driver
(2) 6-32 Flat Head Screws - Requires 5/64 Wrench or Driver
(2) 8-40 Torx Screws - Requires T10 Wrench or DriverRed Dot Fitment:
Vortex Viper
Vortex Venom
Burris Fast Fire 1, 2, 3, 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot*All ADE mounts require 6-32 x 3/8" screws.
Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.Ā
-
Product Details
The EGW red dot sight mount adapter plates for the Savage / Stevens 301 12 and 20 gauge modelsĀ are meant to be installed in place of the factory rail. Simply remove the rail your gun and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or DocterĀ red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
- Remove the factory mount
- Install the EGW Sight Mount on the raised interface
- Secure the plate to the barrel of the gun with the provided screws and torque to 20 in/lbs
- Place the red dot sight on the EGW Mount
(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
- Apply blue Loctite to the provided red dot mounting screws
- Torque red dot mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
Modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Click here to see a video from Vortex on how to install our red dot base on a slide.Ā ĀĀ
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
-
More Information
More Information GTIN 841370118397 Scope Mount Color Black Hardcoat Anodized Type III Firearm Model 301 (12 and 20 Gauge) Firearm Manufacturer Savage, Stevens Red Dot Brand ADE RD3-001 / RD3-002 / RD3-006 / RD3-009 / RD3-012 / RD3-013 / RD3-015, Burris FastFire 1, 2, 3, 4, Crimson Trace CTS-1200 / CTS-1300, Docter, Vortex Venom / Viper -
Reviews
-
Product Questions